background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

03/02/21

Message Overview:

Message Name:

SPOILER RIGGING FAILED
(Service Message)

Message Code:

B3-527484

Associated CAS:

None

Reporting LRU: SPOILER ECU 2
System Description: 27-61-00
Schematic Diagram: 27-61-00
Wiring Diagram: 27-61-07

Message Description:

Spoiler rigging failed.

Possible Causes:

  • Spoiler Electronic-Control Unit 2 (SECU 2) (A119)
  • Variable Differential Transformer (XVDT)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Fault Confirmation Procedure:

  1. Message# = 34
  2. Fault Logged = GND
  3. Status = MAINTENANCE
  4. {Term Definitions}

    1. SECU2-47 XX 354 10 EXCT XXXX-XXXX XXXX-XXXX XXXT-XXXX 354 :13; SPOILER RIGGING FAILED

Quick Links:

Removal of the Spoiler Electronic-Control Unit (SECU) AMM 27-61-05-000-801
Installation of the Spoiler Electronic-Control Unit (SECU) AMM 27-61-05-400-801
Electronic Rigging of the Spoiler Electronic-Control Unit (SECU) AMM 27-61-05-820-801
Electronic Rigging of the Spoiler Electronic-Control Unit (SECU) AMM 27-61-05-820-802
Removal of the Multi-Function Spoiler Rotary Variable-Differential Transformer (MFS RVDT) AMM 27-61-11-000-801
Installation of the Multi-Function Spoiler Rotary Variable-Differential Transformer (MFS RVDT) AMM 27-61-11-400-801
Rigging Check of the Multi-Function Spoiler Rotary Variable-Differential Transformer (MFS RVDT) AMM 27-61-11-220-801
Operational Test of the Multi-Function Spoiler System AMM 27-62-00-710-801
Wiring - Maintenance Practices - ALL SPM 20-12-00-02
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02
Electrical Connectors - Maintenance Practice - ALL SPM 20-20-00-02

Troubleshooting Recommendations:

  1. Verify R-SECU input, XVDT, wiring, hydraulic or surface position.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.