background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

03/19/21

Message Overview:

Message Name:

INTERNAL FAULT

Message Code:

B3-006483

Associated CAS:

None

Reporting LRU: DCP 2
System Description: 34-00-00
36-00-00
Schematic Diagram: 36-11-00
Wiring Diagram: None

Message Description:

An internal DCP fault is detected.

Possible Causes:

  • Display Control Panel (DCP) (PL8)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Fault Confirmation Procedure:

  1. LRU = DCP2 DCP2
  2. ATA Chapter = 34-25
  3. Message# = 2
  4. Comp Id = PL08
  5. {Term Definitions}

    1. DCP2-3 2X 350 10 EXCT XXXX-XXXX XTXX-XXXX XXXX-XXXX 350: 23;R-DCP CONFIG STRAP FAULT

Quick Links:

Removal of the Control Display Unit (CDU) AMM 34-61-05-000-801
Installation of the Control Display Unit (CDU) AMM 34-61-05-400-801
Standard Practices - Replace Wiring SPM 20-12-00-02
Standard Practices - Wire Repair SPM 20-12-10-02

Troubleshooting Recommendations:

  1. Replace the DCP.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.