background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

04/07/21

Message Overview:

Message Name:

DISAGREE / VALVE OPEN

Message Code:

B3-006842

Associated CAS:

L WING ANTI-ICE FAIL
(Caution)

Reporting LRU: HI PRESS VALVE 1
System Description: 36-00-00
Schematic Diagram: 30-12-00
Wiring Diagram: 36-15-01

Message Description:

The HIGH PRESS VALVE 1 is detected failed in open position.

Possible Causes:

  • High Pressure Valve 1 (HPV) (V5)
  • Position Switch
  • Integrated Air System Controller 1 (IASC) (A55)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Fault Confirmation Procedure:

  1. Message# = 2
  2. {Term Definitions}

    1. IAS1A-69 XX 353 01 EXCT XXXX-XXXX XXXX-XTXX XXXX-XXXX 353B: 19; HI PRESS VALVE 1 FAIL

Quick Links:

Removal of the Integrated Air System (IAS) Controller AMM 21-31-01-000-801
Installation of the Integrated Air System (IAS) Controller AMM 21-31-01-400-801
Leak Test of the High-Pressure Bleed-Air System AMM 36-15-00-790-801
Removal of the High Pressure Valve AMM 36-15-01-000-801
Installation of the High Pressure Valve AMM 36-15-01-400-801
Removal of the High Pressure Sensors AMM 36-15-03-000-801
Installation of the High Pressure Sensors AMM 36-15-03-400-801
Operational Test of the Maintenance Diagnostic System AMM 45-45-00-710-801
Wiring - Maintenance Practices - ALL SPM 20-12-00-02
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02

Troubleshooting Recommendations:

  1. Check valve or position switch or wiring between the valve, and the IASC #1.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.