background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

04/13/21

Message Overview:

Message Name:

CGV ACTUATOR 4

Message Code:

B3-302586

Associated CAS Message:

R FADEC FAIL
(Caution)

Reporting LRU: R ENG CGV ACT
System Description: 73-30-00
Schematic Diagram: 73-21-00 Sh. 3
Wiring Diagram: None

Message Description:

Right engine CVG actuator fault 4.

[MCID 0203]
CVG Actuator 4.
Detection of a fault primarily in the CVG actuator.

Possible Causes:

  • Compressor Variable Geometry (CVG) Mechanical System
  • Compressor Variable Geometry (CVG) Actuator
  • Hydromechanical Unit (HMU)

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Component Location AMM 28-41-00-992-801
General Visual Inspection of the Engine Wiring Harness AMM 71-50-00-210-802
Removal of the Hydromechanical Unit (HMU) AMM 73-20-01-000-801
Installation of the Hydromechanical Unit (HMU) AMM 73-20-01-400-801
Functional Test of the Hydromechanical Unit (HMU) Motive Flow Pressure AMM 73-20-01-720-801
Component Location AMM 75-31-00-992-801
Removal of the Compressor Variable-Geometry Actuator AMM 75-31-09-000-801
Installation of the Compressor Variable-Geometry Actuator AMM 75-31-09-400-801
General Visual Inspection of the Compressor Guide-Vane Actuator System on the Engine AMM 75-31-09-210-801
Wiring - Maintenance Practices - ALL SPM 20-12-00-02
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02
Electrical Connectors - Maintenance Practice - ALL SPM 20-20-00-02

Troubleshooting Recommendations:

  1. MCID 0203 fault present, troubleshoot using the following steps for aircraft and engine fault isolation with reference to the Light Engine Maintenance Manual TASK 72-00-00-810-035.

overview

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.