background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

05/06/21

Message Overview:

Message Name:

ARINC RECEIVER ARI-1A

Message Code:

B3-302180

Associated CAS:

L ENGINE FAULT
(Advisory)

L ENG THRUST FAULT
(Advisory)

Reporting LRU: L ENG ARINC
System Description: 78-30-00
Schematic Diagram: 76-11-00
Wiring Diagram: None

Message Description:

R IOC ARINC input is missing to FADEC Ch. A - ARI-1 port.

[MCID 1503]
A fault related to the ARI-1 ARINC data bus input to the ECU A was detected.

Possible Causes:

  • Aircraft Wiring from the Right IOC to the ECU A
  • Aircraft System
  • Right Input/Output Concentrator (IOC) (A4-IOC)

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Input/Output Concentrator Unit (IOC) AMM 31-45-05-000-801
Installation of the Input/Output Concentrator Unit (IOC) AMM 31-45-05-400-801
Operational Test of the Input/Output Concentrator Unit (IOC) AMM 31-45-05-710-801
Removal of the FADEC Electrical Harness from the Left Engine AMM 71-50-05-000-802
Installation of the FADEC Electrical Harness on the Left Engine AMM 71-50-05-400-802
Removal of the Engine Electronic Control Unit (ECU) AMM 76-10-05-000-801
Installation of the Engine Electronic Control Unit (ECU) AMM 76-10-05-400-801
Wiring - Maintenance Practices - ALL SPM 20-12-00-02
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02
Electrical Connectors - Maintenance Practice - ALL SPM 20-20-00-02

Troubleshooting Recommendations:

  1. MCID 1503 fault present, troubleshoot using the following steps for aircraft and engine fault isolation with reference to the Light Engine Maintenance Manual TASK 72-00-00-810-315.

overview

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.