background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

12/29/25

Message Overview:

Message Name:

TR ICU 4

Message Code:

B3-304264

Reporting LRU: Right Engine Thrust Reverser Isolation Control-Unit (R ENG TR ICU)
Associated CAS: None
System Description: 78-30-00 - Thrust Reverser
Schematic Diagram: SSM 78-30-00-101 - Thrust Reverser
Wiring Diagram: WM 78-32-09-1_001 - Sheet 1 - Thrust-Reverser Isolation Control-Unit (ICU) RHS - ALL

Message Description:

Right Engine Thrust Reverser Isolation Control-Unit (ICU) fault 4.

[MCID 1442]
TR ICU 4.

A fault in the wiring harness between the TR ICU, the ECU A or the Electronic Control Unit (ECU) Channel B.

Possible Causes:

  • Right Full Authority Digital Engine Control (FADEC) Channel A (A40)/Electronic Control Unit (ECU)
  • Right Full Authority Digital Engine Control (FADEC) Channel B (A42)/Electronic Control Unit (ECU)
  • Right Thrust Reverser Isolation Control Unit (ICU) (A116)/Solenoid
  • Aircraft Wiring Harness
  • Wiring Harness (W1)

Troubleshooting Tips:

Advisory Wire/Service Bulletin:

Full Throttle Blog/Forum Articles/Infoservice/Newsletter: None

Flight Operation Notifications Manual (FONM): None

Quick Links:

Removal of the Engine Electronic Control Unit (ECU) AMM 76-10-05-000-801
Installation of the Engine Electronic Control Unit (ECU) AMM 76-10-05-400-801
Deactivation of the Thrust Reverser (For Maintenance) AMM 78-30-00-040-801
Activation of the Thrust Reverser (For Maintenance) AMM 78-30-00-440-801
Operational Test of the Thrust Reverse AMM 78-30-00-710-801
General Visual Inspection of the Thrust Reverser AMM 78-30-00-210-802
Removal of the Thrust-Reverser Isolation Control-Unit (ICU) AMM 78-32-07-000-801
Installation of the Thrust-Reverser Isolation Control-Unit (ICU) AMM 78-32-07-400-801
General Visual Inspection of the Thrust-Reverser Wiring Harness AMM 78-33-00-210-801
Removal of the Thrust-Reverser Harness (Multiplexer) AMM 78-33-06-000-804
Installation of the Thrust-Reverser Harness (Multiplexer) AMM 78-33-06-400-804
Safety Precautions - Maintenance Practices - ALL SPM 20-00-01-02
Wiring - Maintenance Practices - ALL SPM 20-12-00-02
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02
Electrical Connectors - Maintenance Practice - ALL SPM 20-20-00-02

Troubleshooting Recommendations:

  1. MCID 1442 fault present, troubleshoot using the following steps for aircraft and engine fault isolation with reference to the Light Engine Maintenance Manual Subtask 72-00-00-810-273-A01.
  2. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.