background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

04/26/21

Message Overview:

Message Name:

ATTITUDE FLAG (Warning)

Identifier: 342OBS002
Effectivity: AIRCRAFT 20501 - 20999
System: Navigation
Associated CAS: None
System Description: 34-20-00
Schematic Diagram: None
Wiring Diagram: 34-21-01
34-21-05

Message Description:

The red 'ATT' warning flag indicates invalid attitude source.

  • A loss of all attitude data from the selected IRS, most likely caused by an IRS fault or power failure. Verification of system failure can be checked on the MDC current fault page for further system details.

Possible Causes:

  • Input/Output Concentrator (IOC) (A4-IOC)
  • Inertial Reference Unit 1 (IRS 1) (A233)
  • Inertial Reference Unit 2 (IRS 2) (A232)
  • Data Bus Failure
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Input/Output Concentrator Unit (IOC) AMM 31-45-05-000-801
Installation of the Input/Output Concentrator Unit (IOC) AMM 31-45-05-400-801
Operational Test of the Input/Output Concentrator Unit (IOC) AMM 31-45-05-710-801
Operational Test of the Inertial Reference System (IRS) AMM 34-45-00-710-801
Removal of the Inertial Reference Unit (IRU) AMM 34-45-01-000-801
Installation of the Inertial Reference Unit (IRU) AMM 34-45-01-400-801
Wiring - Maintenance Practices - ALL SPM 20-12-00-02
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02

Troubleshooting Recommendations:

  1. None

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.