background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

02/24/21

Message Overview:

Message Name:

INTERNAL FAULT

Message Code:

B3-008087

Associated CAS:

None

Reporting LRU: VHF 3
System Description: 23-11-00
Schematic Diagram: 23-11-00
Wiring Diagram: 23-11-03

Message Description:

Internal failure reported by third VHF.

Possible Causes:

  • Third VHF Communication Unit (VHF 3) (A10)

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the VHF Communication Unit AMM 23-11-01-000-801
Installation of the VHF Communication Unit AMM 23-11-01-400-801

Troubleshooting Recommendations:

  1. Reset VHF 3 Circuit Breaker CB3-E2. Is the fault message still present?

    1. If YES, continue with next step.
    2. If NO, do close out.

  2. Replace third VHF (A10).
    NOTE: Depending on the parts installed, swap test is possible to confirm failure. Verify interchangeability in AIPC 23-11-01 before proceeding.
  3. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.