02/25/21
Message Overview:
Message Description:
The Hydraulic-Motor Driven Generator Control Unit has not completed the Maintenance Test. HMDG Maintenance Test Switch has been pressed for less than 3.7 Seconds.
This message is a Service Message that would never be logged and will only be seen during approx. 15 seconds on the CURRENT SERVICE MESSAGE page.
Possible Causes:
- None
Troubleshooting Tips:
Advisory Wire/Service Bulletin:
- SB100-24-04 - MODIFICATION - EMERGENCY DC-POWER SYSTEM - Installation of the Hydraulic Motor Driven Generator (HMDG) Option (C24-300)
Forum Articles/Infoservice/Newsletter: None
Fault Confirmation Procedure:
|
Quick Links:
| Operational Test of the Hydraulic-Motor Driven Generator (HMDG) | AMM 24-33-00-710-801 |
Troubleshooting Recommendations:
- None