background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

03/24/21

Message Overview:

Message Name:

NO RB-RIU-7 BUS INPUT

Message Code:

B3-007262

Associated CAS:

None

Reporting LRU: NAV 2
System Description: 34-51-00
Schematic Diagram: 34-51-00
Wiring Diagram: 34-51-05

Message Description:

RB-RIU-7 data absent at R-NAV-ADF/VIR and NOT absent at R-DME. Input pins are 21 and 22.

Possible Causes:

  • R VHF Navigation Receiver No. 2 (ADF VIR) (A48)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Fault Confirmation Procedure:

  1. LRU = NAV2 NAV 2
  2. ATA Chapter = 34-51
  3. Message# = 7
  4. Comp Id = A048
  5. {Term Definitions}

    1. NAV2-3 2X 057 10 EXCT XXXX-XXXX XXXX-XXXX XXTX-XXXX 057A: 14;NO RB-RIU-7 IN TO ADF
    2. NAV2-9 2X 057 10 EXCT XXXX-XXXX XXXX-XXXX XXTX-XXXX 057V: 14;NO RB-RIU-7 IN TO VIR
    3. DME2-3 2X 057 10 EXCT XXXX-XXXX XXXX-XXXX XXTX-XXXX 057: 14;NO RB-RIU-7 BUS INPUT

Quick Links:

Removal of the VHF Navigation Receiver AMM 34-51-01-000-801
Installation of the VHF Navigation Receiver AMM 34-51-01-400-801
Standard Practices - Replace Wiring SPM 20-12-00-02
Standard Practices - Repair Wiring SPM 20-12-10-02

Troubleshooting Recommendations:

  1. Suspect failed R-NAV input or wiring. Input pins are 21 and 22.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.