background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

03/26/21

Message Overview:

Message Name:

NO RA-RIU-8 BUS INPUT

Message Code:

B3-008028

Associated CAS:

None

Reporting LRU: TDR 2
System Description: 34-54-00
Schematic Diagram: 34-54-00
Wiring Diagram: 34-54-05

Message Description:

RA-RIU-8 bus data absent at R-TDR and NOT absent at R-HF.

Possible Causes:

  • Right Air Traffic Control (ATC) Transponder (TDR) (A30)
  • Radio Interface Unit-8 (RIU) (A18)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Fault Confirmation Procedure:

  1. Message# = 9
  2. Comp Id = A030
  3. {Term Definitions}

    1. TDR2-2 2X 350 10 EXCT XXXX-XXXX XXXX-XXXX XTXX-XXXX 350: 15;NO RA-RIU-8 BUS INPUT
    2. HF2-3 2X 351 10 EXCT XXXX-XXXX XXXX-XXXX XXXT-XXXX 351: 13;NO RA-RIU-8 BUS INPUT

Quick Links:

Removal of the Radio Interface Unit (RIU) AMM 23-51-21-000-801
Installation of the Radio Interface Unit (RIU) AMM 23-51-21-400-801
Removal of the Air Traffic Control (ATC) Transponder AMM 34-54-01-000-801
Installation of the Air Traffic Control (ATC) Transponder AMM 34-54-01-400-801
Standard Practices - Replace Wiring SPM 20-12-00-02
Standard Practices - Repair Wiring SPM 20-12-10-02

Troubleshooting Recommendations:

  1. Check RIU-8 input to TDR first. Also suspect failed RA-RIU-8 output or wiring.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.