background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

03/31/21

Message Overview:

Message Name:

CCP BUTTON STUCK

Message Code:

B3-514076

Associated CAS:

None

Reporting LRU: CCP 2
System Description: 31-61-00
Schematic Diagram: 31-61-00
Wiring Diagram: 31-61-09

Message Description:

R MFD is indicating a failed CCP button and CCP is indicating a keyboard fault. Likely problem is a stuck CCP button.

Possible Causes:

  • Cursor Control Panel 2 (PL60)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Fault Confirmation Procedure:

  1. Message# = 2
  2. {Term Definitions}

    1. CCP2-2 2X 350 10 EXCT XXXX-XXXX XXTX-XXXX XXXX-XXXX 350 :22;KEYBOARD FAUL
    2. MFD2-14 2X 350 NA EXCT XXXX-XXXX XTXX-XXXX XXXX-XXXX 350:23;CCP BUTTON STUCK

Quick Links:

Removal of the Cursor Control Panel AMM 31-61-09-000-801
Installation of the Cursor Control Panel AMM 31-61-09-400-801
Wiring - Maintenance Practices - ALL SPM 20-12-00-02
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02
Electrical Connectors - Maintenance Practice - ALL SPM 20-20-00-02

Troubleshooting Recommendations:

  1. R MFD is indicating a failed CCP button and CCP is indicating a keyboard fault. Likely problem is a stuck CCP button.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.