background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

04/14/21

Message Overview:

Message Name:

AUTO APR INHIBIT 4

Message Code:

B3-302975

Associated CAS:

None

Reporting LRU: ENG CNTL PNL
System Description: 76-11-00
Schematic Diagram: None
Wiring Diagram: None

Message Description:

Right engine auto APR inhibit command fault 4.

[MCID 1313]
APR Inhibit 4.
A fault within the cockpit auto APR inhibit command was sensed.

Possible Causes:

  • Full Authority Digital Engine Control Unit (FADEC) Electronic Control Unit A (ECU) (A40)
  • Full Authority Digital Engine Control Unit (FADEC) Electronic Control Unit B (ECU) (A42)
  • Aircraft Harness
  • APR Off Switch
  • Auto APR Off Switch System, Switch, and Harnessing
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

General Visual Inspection of the Engine Wiring Harness AMM 71-50-00-210-802
Removal of the FADEC Electrical Harness from the Right Engine AMM 71-50-05-000-803
Installation of the FADEC Electrical Harness on the Right Engine AMM 71-50-05-400-803
Removal of the Engine Electronic Control Unit (ECU) AMM 76-10-05-000-801
Installation of the Engine Electronic Control Unit (ECU) AMM 76-10-05-400-801
Wiring - Maintenance Practices - ALL SPM 20-12-00-02
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02
Electrical Connectors - Maintenance Practice - ALL SPM 20-20-00-02

Troubleshooting Recommendations:

  1. MCID 1313 fault present, troubleshoot using the following steps for aircraft and engine fault isolation with reference to the Light Engine Maintenance Manual Subtask 72-00-00-810-229-A01.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.