background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

12/07/22

Message Overview:

Message Name:

LOW OIL PRES EXCEEDANCE

Message Code:

B3-303731

Associated CAS:

R ENG OIL PRESS LOW
(Warning)

Reporting LRU: R ENG EXCEEDANCE
System Description: 79-30-00
Schematic Diagram: 79-31-00
Wiring Diagram: None

Message Description:

Right engine low oil pressure threshold exceedance occurred.

[MCID 2005]
A Type 2 low oil pressure exceedance has been detected.

Possible Causes:

  • Low Oil Level
  • Oil Pressure Sensor
  • Last Chance Screen
  • Oil Filter Module
  • Fuel Heater Oil Cooler (FHOC)
  • Oil Pump

Troubleshooting Tips:

Advisory Wire/Service Bulletin: 

Forum Articles/Infoservice/Newsletter:

Quick Links:

Removal of the Engine Electronic Control Unit (ECU) AMM 76-10-05-000-801
Installation of the Engine Electronic Control Unit (ECU) AMM 76-10-05-400-801
Removal of the Oil Pump AMM 79-21-01-000-802
Installation of the Oil Pump AMM 79-21-01-400-802
Removal of the Oil Filter AMM 79-21-05-000-801
Installation of the Oil Filter AMM 79-21-05-400-801
Removal of the Chip Detector AMM 79-21-09-000-801
Installation of the Chip Detector AMM 79-21-09-400-801
Removal of the Oil Filter Bypass-Indicator AMM 79-31-01-000-802
Installation of the Oil Filter Bypass-Indicator AMM 79-31-01-400-802
Removal of the Oil Temperature Transducer AMM 79-31-05-000-801
Installation of the Oil Temperature Transducer AMM 79-31-05-400-801
Removal of the Oil Pressure Transducer AMM 79-31-09-000-801
Installation of the Oil Pressure Transducer AMM 79-31-09-400-801
Removal of the Oil Level Probe AMM 79-31-13-000-801
Installation of the Oil Level Probe AMM 79-31-13-400-801
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02

Troubleshooting Recommendations:

  1. Refer to Honeywell SIL AS907-14.
  2. MCID 2005 fault present, troubleshoot using the following steps for aircraft and engine fault isolation with reference to the Light Engine Maintenance Manual Subtask 72-00-00-810-384-A01.
  3. Access the aircraft Maintenance Data Computer. Record the maintenance conditions. Refer to the Aircraft Maintenance Manual. If required, download ECFR data from the ECUs. (Refer to the Honeywell LEMM SUBTASK 72-00-00-000-201, Fault Isolation.) Review the ECFR data to determine the minimum and duration of the Type 1 low oil pressure exceedance.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.