background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

01/29/21

Message Overview:

Message Name:

OUT OF RANGE

Message Code:

B3-006404

Associated CAS:

AIR COND FAULT
(Advisory)

Reporting LRU: CABIN T SEL PNL
System Description: 21-61-00
Schematic Diagram: 21-61-00
Wiring Diagram: 21-61-01

Message Description:

The CABIN TEMPERATURE SELECTOR located on the bleed/air conditioning panel is detected failed.

Possible Causes:

  • Cabin Temperature Selector (R3)
  • Integrated Air System Controller 2 (IASC2) (A56)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Fault Confirmation Procedure:

  1. Message# = 1
  2. Message = OUT OF RANGE
  3. Fault Logged = AIR,TAXI
  4. Status = FAILED/WIRING
  5. Timer = 5
  6. Logic = IAS2A-60
  7. {Term Definitions}

    1. IAS2A-60 XX 353 10 EXCT XXXX-XXXX XXXT-XXXX XXXX-XXXX 353A:21; CABIN TEMP SELECTOR FAIL

Quick Links:

Removal of the Integrated Air System (IAS) Controller AMM 21-31-01-000-801
Installation of the Integrated Air System (IAS) Controller AMM 21-31-01-400-801
Removal of the Cabin Ventilated Temperature-Sensor AMM 21-61-21-000-801
Installation of the Cabin Ventilated Temperature-Sensor AMM 21-61-21-400-801
Wiring - Maintenance Practices - ALL SPM 20-12-00-02
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02
Electrical Connectors - Maintenance Practice - ALL SPM 20-20-00-02

Troubleshooting Recommendations:

  1. Check the selector or the wiring to the selector and the IASC #2.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.