background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE
(CAUTION)
AMBER MESSAGE
(ADVISORY)
CYAN MESSAGE
(STATUS)
WHITE MESSAGE
Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

02/02/21

Message Overview

Message Name:

CH A FAULT
(Service Message)

Message Code:

B3-006469

Associated CAS:

AIR COND FAULT
(Advisory)

Reporting LRU: CKPT VENT T SNSR
System Description: 21-61-00
Schematic Diagram: None
Wiring Diagram: None

Message Description:

The channel A of the COCKPIT VENTILATED TEMPERATURE SENSOR is detected failed.

Possible Causes:

  • Integrated Air System Controller #1 (IASC) (A55)
  • Cockpit Ventilated Temperature Sensor - Channel A (MT37)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Fault Confirmation Procedure:

  1. Message# = 2
  2. Fault Logged = AIR,TAXI
  3. Status = FAILED/WIRING
  4. {Term Definitions}

    • IAS1A-58 XX 353 00 EXCT XXXX-XXXX TXXX-XXXX XXXX-XXXX 353A: 24; COCKPIT VENTILATED SNSR
    • IAS2A-63 XX 353 10 EXCT XXXX-XXXX TXXX-XXXX XXXX-XXXX 353A: 24; COCKPIT VENTILATED SNSR

  5. Equ Note = Changed v4.2 to reduce nuisance fails with Eq#1.

Quick Links:

Standard Practices - Replace Wiring SPM 20-12-00-02
Standard Practices - Repair Wiring SPM 20-12-10-02

Troubleshooting Recommendations:

  1. Check the sensor or the wiring to the sensor and the IASC #1.
Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.