background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

03/11/21

Message Overview:

Message Name:

NG DNLK1 OPEN

Message Code:

B3-007446

Associated CAS:
PROX SYS FAULT
(Advisory)

Reporting LRU: NGDLK1 SNSR
System Description: 32-60-00
Schematic Diagram: 32-61-00
Wiring Diagram: 32-61-05
32-61-09
32-61-12

Message Description:

PSEU detects an OPEN circuit within the proximity sensor PX10 Nose Gear Downlock1 or in the wiring to the proximity sensor or aircraft.

Possible Causes:

  • Nose Landing-Gear Downlock 1 Proximity-Sensor (PX10)
  • Proximity-Sensor Electronic Unit (PSEU) (A9)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum/Infoservice/Newsletter: None

Quick Links:

Operational Test of the Proximity Sensors AMM 32-61-00-710-801
Functional Test of the Proximity Sensors AMM 32-61-00-720-801
Removal of the Nose Landing-Gear (NLG) Proximity-Sensors AMM 32-61-05-000-801
Installation of the Nose Landing-Gear (NLG) Proximity Sensors AMM 32-61-05-400-801
Removal of the Proximity-Sensor Electronic Unit (PSEU) AMM 32-61-09-000-801
Installation of the Proximity-Sensor Electronic Unit (PSEU) AMM 32-61-09-400-801
Functional Test of the Proximity-Sensor Electronic Unit (PSEU) AMM 32-61-09-720-801
Standard Practices - Replace Wiring SPM 20-12-00-02
Standard Practices - Wire Repair SPM 20-12-10-02

Troubleshooting Recommendations:

  1. Pull and reset the PSEU gear system breakers (CB1-C13, CB1-C14, CB2-C13, CB2-C14), recheck the system for the fault.
  2. Verify the wiring checks from the PSEU A9CP1 PIN E4 to PX10P1 PIN 1, and from PSEU A9CP1 PIN 3E to PX10P1 PIN 2.
  3. If the wiring checks good, download and have field service review the PSEU NVM. Further troubleshooting will depend on results of the PSEU NVM.
  4. If the fault is still there replace PX10 per the installation procedure, and then check the sensor out.
  5. If the fault is still there replace the PSEU.
  6. Functional check the proximity sensor electronic unit.

pseu_location60_lh_cbpnl60_rh_cbpnl

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.