background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

05/06/21

Message Overview:

Message Name:

NG WOFW2 REASONABLENESS

Message Code:

B3-007488

Associated CAS:

WOW FAIL
(Caution)

PROX SYS FAULT
(Advisory)

Reporting LRU: NGWOFW2 SNSR
System Description: 32-60-00
Schematic Diagram: 32-61-00
Wiring Diagram: 32-61-05
32-61-09
32-61-12

Message Description:

PSEU detects an unreasonable (related to rigging) condition to the proximity sensor PX33 Nose Gear WOW2; target condition (NEAR or FAR) is opposite of what it should be. Sensor is healthy but requires proper rigging.

Possible Causes:

  • Nose Landing-Gear Weight-Off-Wheels 2 Proximity-Sensor (PX33)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Nose Landing-Gear (NLG) Proximity-Sensors AMM 32-61-05-000-801
Installation of the Nose Landing-Gear (NLG) Proximity Sensors AMM 32-61-05-400-801
Removal of the Proximity-Sensor Electronic Unit (PSEU) AMM 32-61-09-000-801
Installation of the Proximity-Sensor Electronic Unit (PSEU) AMM 32-61-09-400-801
Standard Practices - Replace Wiring SPM 20-12-00-02
Standard Practices - Wire Repair SPM 20-12-10-02

Troubleshooting Recommendations:

  1. Do the rigging with the adjustment of the sensor.

    1. If the rigging is good, do close out.
    2. If fault remains continue with next step.

  2. Replace the sensor.
  3. Go to step 1.
  4. Do close out.

pseu_location

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.