background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

03/11/21

Message Overview:

Message Name:

RNGDRCL OPEN

Message Code:

B3-007494

Associated CAS:

PROX SYS FAULT
(Advisory)

Reporting LRU: RNGDRCL SNSR
System Description: 32-60-00
Schematic Diagram: 32-61-00
Wiring Diagram: 32-61-05
32-61-09
32-61-12

Message Description:

PSEU detects an OPEN circuit within the proximity sensor PX35, Right Nose Gear Door Closed, or in the wiring to the proximity sensor or aircraft.

Possible Causes:

  • Proximity-Sensor Electronic Unit (PSEU) (A9)
  • Right Nose Landing-Gear Door Closed Proximity Sensor (PX35)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Nose Landing-Gear (NLG) Proximity-Sensors AMM 32-61-05-000-801
Installation of the Nose Landing-Gear (NLG) Proximity Sensors AMM 32-61-05-400-801
Removal of the Proximity-Sensor Electronic Unit (PSEU) AMM 32-61-09-000-801
Installation of the Proximity-Sensor Electronic Unit (PSEU) AMM 32-61-09-400-801
Standard Practices - Replace Wiring SPM 20-12-00-02
Standard Practices - Wire Repair SPM 20-12-10-02

Troubleshooting Recommendations:

  1. Pull and reset the PSEU gear system breakers (CB1-C13, CB1-C14,CB2-C13, CB2-C14).

    1. If system checks are good, do close out.
    2. If fault remains, continue with next step.

  2. Do wiring checks between PSEU A9CP1 (pins 10F, 9F) and J100 (pins N, P). Repair as required.

    1. If system checks are good, do close out.
    2. If fault remains, continue with next step.

  3. Replace PX35.
    NOTE: Sensor resistance should be made with a meter using a < 10 mA supply of current. Never apply voltage through a sensor! Current will magnetize the sensor rendering it unreliable. Sensor resistance is typically 11 to 13 Ω.

    1. If system checks are good, do close out.
    2. If fault remains, continue with next step.

  4. Replace PSEU.
  5. Do close out.

60_lh_cbpnl60_rh_cbpnlpseu_location

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.