background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

03/23/21

Message Overview:

Message Name:

NO R-IRS-2 BUS OUTPUT

Message Code:

B3-006992

Associated CAS:

None

Reporting LRU: IRS 2
System Description: 34-00-00
Schematic Diagram: 34-45-00
Wiring Diagram: 34-45-01

Message Description:

R-IRS-2 inputs to MFD 2 and PFD 2 are inactive.

Possible Causes:

  • Inertial Reference Unit (IRU) No. 2 (A232)
  • Junction Box (JB4)
  • Adaptive Flight-Display Unit MFD2 (A28)
  • Adaptive Flight-Display Unit PFD2 (A26)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Junction Box JB4 AMM 24-63-13-000-802
Installation of the Junction Box JB4 AMM 24-63-13-400-802
Removal of the Adaptive Flight-Display Unit AMM 31-61-01-000-801
Installation of the Adaptive Flight-Display Unit AMM 31-61-01-400-801
Removal of the Inertial Reference Unit (IRU) AMM 34-45-01-000-801
Installation of the Inertial Reference Unit (IRU) AMM 34-45-01-400-801
Standard Practices - Replace Wiring SPM 20-12-00-02
Standard Practices - Repair Wiring SPM 20-12-10-02

Troubleshooting Recommendations:

  1. Reset IRU 2 (CB2-C2), PFD 2 (CB2-C3) and MFD 2 (CB2-C5) circuit breakers.

    1. If system check passes, do close out.
    2. If fault remains, continue with next step.

  2. Swap IRUs.

    1. If system check passes, do close out.
    2. If fault remains, continue with next step.

  3. Do wiring check of the ARINC 429 data bus R-IRS-2 from IRU 2 connector A232P1, through Junction Box 4, PFD 2 connector A26P2 and MFD 2 connector A28P2. Repair/replace as required.

    1. If system check passes, do close out.
    2. If fault remains, continue with next step.
      NOTE: An internal short of any LRUs connected to this data bus might cause this failure.

  4. Swap PFDs.

    1. If system check passes, do close out.
    2. If fault remains, continue with next step.

  5. Swap MFDs.

    1. If system check passes, do close out.
    2. If fault remains, continue with next step.

  6. Replace JB 4.
  7. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.