background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

03/31/21

Message Overview:

Message Name:

NO L-IOC-2 BUS INPUT

Message Code:

B3-539736

Associated CAS:

None

Reporting LRU: TSS-4100
System Description: 34-43-00
Schematic Diagram: 34-43-00
Wiring Diagram: 31-45-11
34-43-01

Message Description:

TSS is reporting a failed L-IOC-2 bus input, while the L-FSU and R-IOC are not reporting a failed L-IOC-2 bus input.

Possible Causes:

  • Traffic Alert and Collision-Avoidance System (TCAS) Transceiver (TSS-4100) (A238)
  • Junction Box (JB4)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Junction Box JB4 AMM 24-63-13-000-802
Installation of the Junction Box JB4 AMM 24-63-13-400-802
Removal of the Traffic/Collision Avoidance System (TCAS) and Traffic Surveillance System (TSS) Transponder Unit AMM 34-43-03-000-801
Installation of the Traffic/Collision Avoidance System (TCAS) and Traffic Surveillance System (TSS) Transponder Unit AMM 34-43-03-400-801
Standard Practices - Replace Wiring SPM 20-12-00-02
Standard Practices - Repair Wiring SPM 20-12-00-02

Troubleshooting Recommendations:

  1. Reset TCAS/XPDR 1 Circuit Breaker CB1-A5. Is the fault message still present?

    1. If YES, continue with next step.
    2. If NO, do close out.

  2. Do wiring check between the Traffic/Collision Avoidance System (TCAS) and Traffic Surveillance System (TSS) Transponder Unit (A238) and the Junction Box No. 4 (JB4) for the following wires:

    From To Results
    A238BP1 - H8 JB4FP1 - 9D
    A238BP1 - G8 JB4FP1 - 9C

    1. If wiring check is satisfactory, continue with next step.
    2. If wiring check is not satisfactory, repair the defective wire.

  3. Do wiring check between the Junction Box No. 4 (JB4) and the IAPS (A4) for the following wires:

    From To Results
    JB4FP1 - 9H A4P3 - 33
    JB4FP1 - 9H A4P3 - 35

    1. If wiring check is satisfactory, continue with next step.
    2. If wiring check is not satisfactory, repair the defective wire.

  4. Replace Traffic/Collision Avoidance System (TCAS) and Traffic Surveillance System (TSS) Transponder Unit (A238). Is the fault message still present?

    1. If YES, continue with next step.
    2. If NO, do close out.

  5. Replace Junction Box No. 4.
  6. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.