background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

04/01/21

Message Overview:

Message Name:

NO R-GPS-2 BUS INPUT

Message Code:

B3-633760

Associated CAS:

None

Reporting LRU: TAWS MARK VIII
System Description: 34-42-00
Schematic Diagram: 34-42-00
Wiring Diagram: 34-42-01
34-55-01

Message Description:

R-GPS-2 bus data absent at TAWS but data is present at the SVC.

Possible Causes:

  • Terrain-Avoidance Warning System (TAWS) Computer (A34)
  • Configuration Connector (J2000)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Terrain-Avoidance Warning System (TAWS) Computer AMM 34-42-01-000-801
Installation of the Terrain-Avoidance Warning System (TAWS) Computer AMM 34-42-01-400-801
Removal of the Global Positioning Receiver AMM 34-55-01-000-801
Installation of the Global Positioning Receiver AMM 34-55-01-400-801
Standard Practices - Replace Wiring SPM 20-12-00-02
Standard Practices - Repair Wiring SPM 20-12-10-02

Troubleshooting Recommendations:

  1. Reset TAWS (CB2-A6) circuit breaker or push in the TAWS TEST/RESET Switch on the center pedestal.

    1. If system check passes, do close out.
    2. If fault remains, continue with next step.

  2. Do thewiring check of the ARINC 429 data bus R-GPS-2 from the TAWS computer connector A34AP1, through the J2000 connector, to the GPS 2 connector A24BP1. Repair/replace as required.

    1. If system check passes, do close out.
    2. If fault remains, continue with next step.

  3. Replace the TAWS computer.
  4. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.