background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

04/22/21

Message Overview:

Message Name:

HIGH OIL TEMP EXCEEDANCE

Message Code:

B3-303733

Associated CAS:

R ENG OIL TEMP HIGH
(Caution)

Reporting LRU: R ENG EXCEEDANCE
System Description: 76-11-00
Schematic Diagram: None
Wiring Diagram: None

Message Description:

Right engine high oil temperature threshold exceedance occurred.

[MCID 2006]
A Type 2 high oil temperature threshold exceedance was detected.

Possible Causes:

  • Oil Temperature Sensor
  • Wiring Harness (W4)
  • Fuel Heater/Oil Cooler (FHOC)
  • Mechanical Bearing Failure

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Engine Electronic Control Unit (ECU) AMM 76-10-05-000-801
Installation of the Engine Electronic Control Unit (ECU) AMM 76-10-05-400-801
Removal of the Oil Pump AMM 79-21-01-000-802
Installation of the Oil Pump AMM 79-21-01-400-802
Removal of the Oil Filter AMM 79-21-05-000-801
Installation of the Oil Filter AMM 79-21-05-400-801
Removal of the Chip Detector AMM 79-21-09-000-801
Installation of the Chip Detector AMM 79-21-09-400-801
Removal of the Oil Filter Bypass-Indicator AMM 79-31-01-000-802
Installation of the Oil Filter Bypass-Indicator AMM 79-31-01-400-802
Removal of the Oil Temperature Transducer AMM 79-31-05-000-801
Installation of the Oil Temperature Transducer AMM 79-31-05-400-801
Removal of the Oil Pressure Transducer AMM 79-31-09-000-801
Installation of the Oil Pressure Transducer AMM 79-31-09-400-801
Removal of the Oil Level Probe AMM 79-31-13-000-801
Installation of the Oil Level Probe AMM 79-31-13-400-801
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02

Troubleshooting Recommendations:

  1. MCID 2006 fault present, troubleshoot using the following steps for aircraft and engine fault isolation with reference to the Light Engine Maintenance Manual Subtask 72-00-00-810-385-A01.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.