04/06/21
Message Overview:
Message Description:
R-TDR-XT bus data absent at TSS. Other TDR 2 buses are not absent or fail (IOC, CDU, MFD).
Possible Causes:
- Traffic Alert and Collision-Avoidance System (TCAS) Transceiver (TSS-4100) (A238)
- Air Traffic Control (ATC) Transponder 2 (TDR) (A30)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Operational Test of the Traffic Alert and Collision-Avoidance System (TCAS) | AMM 34-43-00-710-801 |
| Removal of the Traffic/Collision Avoidance System (TCAS) and Traffic Surveillance System (TSS) Transponder Unit | AMM 34-43-03-000-801 |
| Installation of the Traffic/Collision Avoidance System (TCAS) and Traffic Surveillance System (TSS) Transponder Unit | AMM 34-43-03-400-801 |
| Removal of the Air Traffic Control (ATC) Transponder | AMM 34-54-01-000-801 |
| Installation of the Air Traffic Control (ATC) Transponder | AMM 34-54-01-400-801 |
| Functional Test of the Traffic Surveillance System (TSS) | AMM 34-54-01-720-804 |
| Standard Practices - Replace Wiring | SPM 20-12-00-02 |
| Standard Practices - Repair Wiring | SPM 20-12-10-02 |
Troubleshooting Recommendations:
- Reset TCAS/XPDR1 (CB1-A5) circuit breaker.
- If system checks are good, do close out.
- If fault remains, continue with next step.
- Do the wiring check of the ARINC 429 databus R-TDR-XT from ATC 2 connector A30P2 to TSS connector A238EP1. Repair/replace as required.
- If system checks passes, do close out.
- If fault remains, continue with next step.
- Replace TSS.
- If system checks passes, do close out.
- If fault remains, continue with next step.
- Replace ATC 2.
- Do close out.