background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults by MDCBy Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

04/26/21

Message Overview:

Message Name:

PASSENGER CONTROL UNIT DISPLAYS "TERRAIN UPDATE REQUIRED"

Identifier: 441OBS017
Effectivity: Aircraft 20501 - 20999
System: nice® HD Cabin Management System
Associated CAS: None
Reporting LRU: PSM2410-00X-001
System Description: SmartFix Plus 44-00-00, TUG C-ABT207-UG-001
Schematic Diagram: TUGC-ABT207-UG-001
Wiring Diagram: SWDM W1002467113 CMS Power Distribution
SWDM W1004411113 CMS Network
SWDM W1004411133 CMS Control
SWDM W1004421113 Personal Control System

Message Description:

When niceview™ (moving map system) is selected in one or more overhead or passenger displays, the message "Terrain update required" is shown.

Possible Causes:

  • No Terrain Data Available
  • Faulty Terrain Data
  • Incomplete Update/Download of Terrain Data

Required Conditions:

  • Ensure nice® HD CMS/IFE system is booted up completely (power on and wait for about 5 minutes to ensure proper system status reporting).
  • On Galley Control Panel (GCP) navigate to home, cms equipment page, item "system software" and ensure the aircraft MSN is contained in "current p/n" (e.g. for Challenger C350, MSN 20613: p/n SCDC350-20613-A or p/n SCDC3-20613-04A).
    Note: If p/n is incorrect, contact CRC for further instructions.
  • Tools required: see Software Load Procedure for nice® HD on CL350 (C-ABR142-UG-001), section TOOLS FOR NICEVIEW™ TERRAIN DATABASE UPDATE

Troubleshooting Tips:

Advisory Wire/Service Bulletin:

  • SB 350-44-001 - MODIFICATION - Cabin Management System (CMS) - System Configuration Database Software Update

Forum Articles/Infoservice/Newsletter:

More details in the nice® HD CMS/IFE system are available within the Lufthansa Technik document C-ABT207-UG-001, CL350 nice® HD Technical User Guide (TUG).

Quick Links:

Lufthansa Technik Technical User Guide (TUG) CL350 nice® HDC-ABT207-UG-001
Lufthansa Technik Software Load Procedure (SLP) CL350 nice® HDC-ABR142-UG-001

Troubleshooting Recommendations:

  1. Perform "Software Load Procedure for nice® HD on CL350" (C-ABR142-UG-001), section "Perform niceview™ Terrain Database Update".

Requirements after Job Completion:

Ensure the system status is reported as "ready" after a reboot (allow system to run for about 5 minutes to stabilize display of system state).

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.