11/08/19
Message Overview:
| DDG Reference: | None |
| Pilot Action (QRH): | ADVISORY 7-7 |
| System Description: | 27-32-00 |
| Schematic Diagram: | 27-32-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 27-31-01 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
SPC channel A or channel B shows that the pitch disconnect lock does not lock when commanded to lock by the SPC or stays locked when commanded to unlock by the SPC.
Possible Causes:
- Stall Protection Computer (SPC)
- Pitch Disconnect Lock Solenoid
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin:
- AW700-27-0363 - Stall Protection Computer NFF
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Removal of Stall Protection Computer | AMM 27-32-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of Stall Protection Computer | AMM 27-32-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of lock solenoid | AMM 27-31-09-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of lock solenoid | AMM 27-31-09-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Access to Active Faults | AMM 45-45-00-970-802 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Access to Stored Faults | AMM 45-45-00-970-803 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair | SPM 20-12-10 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Using the PMAT, access the Active Faults/Stored Faults as per AMM Tasks.
- Select related CAIMS message below: