07/19/19
Message Overview:
| DDG Reference: | 28-21-06 |
| Pilot Action (QRH): | ADVISORY 8-3 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
XFEED VALVE FAIL (Status) shows when the conditions that follow occur:
- The XFEED SOV switch on the fuel control panel is set to OPEN.
- The indication is that the crossfeed shut-off valve is open.
This troubleshooting applies when it is not under normal conditions.
Possible Causes:
- Fuel Control Panel (AP5)
- XFEED SOV Switch (SDS3)
- Fuel Computer (FMQGC) (A47)
- XFEED SOV Valve (L34)
- Secondary Power Distribution Assembly (SPDA) 2
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Removal of the fuel computer (FMQGC) | AMM 28-41-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the fuel computer (FMQGC) | AMM 28-41-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the fuel control panel (AP5) | AMM 28-20-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the fuel control panel (AP5) | AMM 28-20-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Crossfeed Shutoff Valve Actuator | AMM 28-21-49-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Crossfeed Shutoff Valve Actuator | AMM 28-21-49-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Secondary Power Distribution Assemblies | AMM 24-62-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Secondary Power Distribution Assemblies | AMM 24-62-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Operational Check of the Crossfeed Shutoff Valve | AMM 28-21-45-710-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair | SPM 20-12-10 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- If reporting LRU for this CAS message displayed in RED on the PMAT, select "No available CAIMS message" in the dropdown list.
- If no associated ACTIVE FAULT is displayed on the PMAT, select "No available CAIMS message" in the dropdown list.
- Select related CAIMS message below then click Go.