background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE
(CAUTION)
AMBER MESSAGE
(ADVISORY)
CYAN MESSAGE
(STATUS)
WHITE MESSAGE
Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

10/04/19

Message Overview:

Fault Message:

R CH B AIR DATA COMPUTER CAS RNG MA

Fault Code:

7327429RBR

Associated CAS:

None

Reporting LRU: Right Engine Electronic Controller (EEC)
System Description: 76-10-00
Schematic Diagram: 76-10-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 34-11-01 [ Global Express ]  [ G5000 ]  [ Global XRS ]
34-11-04 [ Global Express ]  [ G5000 ]  [ Global XRS ]
71-50-01 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

The value of Computed Air Speed (CAS), sent by the aircraft is defective. The signal is sent to channel B of the Engine Electronic Controller (EEC) by the Micro Air Data Computers (MADC) 2 or MADC 3. These circuits are continuously monitored by the Full-Authority Digital Engine-Controller (FADEC).

Possible Causes:

  • Micro Air Data Computer (MADC) 2 (A28)
  • Micro Air Data Computer (MADC) 3 (A29)
  • Right Engine Electronic Controller (EEC)

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Micro Air-Data Computers AMM 34-11-09-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Micro Air-Data Computers AMM 34-11-09-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Eng Electronic Controller (EEC) EMM 73-21-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Eng Electronic Controller (EEC) EMM 73-21-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Swap MADC 2 with MADC 1.

    1. If system checks are good, replace MADC 2 and do close out.
    2. If fault remains, continue with next step.

  2. Swap MADC 3 with MADC 1.

    1. If system checks are good, replace MADC 3 and do close out.
    2. If fault remains, continue with next step.

  3. Replace Right EEC.
  4. Do close out.
Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.