07/09/19
Message Overview:
| DDG Reference: | None |
| Pilot Action (QRH): | ABNORM 3-3 |
| System Description: | 22-12-00 |
| Schematic Diagram: | 22-12-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 22-12-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
The elevator mis-trim monitor sets the "AP TRIM IS ND" CAS message when a steady state constant torque is being held by the AP on the elevator servo motor.
Possible Causes:
- Elevator
- Horizontal-Stabilizer
- Elevator Servo (B25)
- Integrated Avionics Computer (IAC)
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
NOTE: The AP TRIM IS ND message is not an indication of a system, an LRU, or an interface fault. The message shows that a pilot action is necessary to correct the condition. Refer to Airplane Flight Manual (AFM).
Quick Links:
| Removal of Integrated Avionics Computers (IAC) | AMM 31-41-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of Integrated Avionics Computers (IAC) | AMM 31-41-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
None