07/09/19
Message Overview:
| DDG Reference: | None |
| Pilot Action (QRH): | ABNORM 3-6 |
| System Description: | 22-13-00 |
| Schematic Diagram: | 22-13-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 22-13-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
The yaw damper system is not engaged.
Possible Causes:
- Yaw Damper (YD) System
- IRS
- Air Data Computer (ADC) Sensors
- Rudder Surface Controller
- Rudder Linear Actuator 1 (B19)
- Rudder Linear Actuator 2 (B18)
- Integrated Avionics Computer (IAC)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
NOTE: The YD OFF message is not an indication of a system, LRU, or interface fault. The message shows that a pilot action is necessary to engage the yaw damper system. Thus, fault isolation procedures are not applicable for this message.
Quick Links:
| Removal of the Rudder Linear Actuators | AMM 22-13-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Rudder Linear Actuators | AMM 22-13-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair | SPM 20-12-10 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- None