background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE
(CAUTION)
AMBER MESSAGE
(ADVISORY)
CYAN MESSAGE
(STATUS)
WHITE MESSAGE
Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

07/24/24

Message Overview:

APU GEN FAIL
(Advisory)

DDG Reference: None
Pilot Action (QRH): ELEC 04-18
System Description: 24-22-00
Schematic Diagram: 24-22-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 24-22-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Message Description:

A failure was detected with the APU Generator.

Possible Causes:

  • APU Generator Control Unit (GCU) (A109)
  • APU Generator (GEN) (A110)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Flight Operation Notification Manual (FONM): None

NOTES:

  • A GCU patch cable (GSE REF# 24X-24-02) can be used to interchange GCUs 1,4 and 5 into position 2 or 3 (for troubleshooting only).
  • The GCU NVMs can only be downloaded at position #2 or #3.

Quick Links:

CAIMS PMAT General Instructions AMM 45-45-00-970-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. If reporting LRU for this CAS message displayed in RED on the PMAT, select "No available CAIMS message" in the dropdown list.
  2. If no associated ACTIVE FAULT is displayed on the PMAT, select "No available CAIMS message" in the drop down list.
  3. Select related CAIMS message below:
Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.