background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

04/13/23

Message Overview:

-> FUEL XFER FAIL
(Caution)

DDG Reference: 28-22-02
Pilot Action (QRH): ABNORM 9-2
System Description: 28-22-00
Schematic Diagram: 28-22-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 28-20-03 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

Wing fuel transfer has been commanded and failed.

Possible Causes:

See Possible Causes: in CAIMS messages troubleshooting pages selectable in the "Troubleshooting Recommendations" section below.

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum/Infoservice/Newsletter: None

Quick Links:

Operational Test of the FUEL Control Panel AMM 28-20-01-710-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Access to Active Faults AMM 45-45-00-970-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Access to Stored Faults AMM 45-45-00-970-803 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Perform the Operational Test of the FUEL Control Panel (AMM 28-20-01-710-801) to test the manual and automatic fuel transfer functions. Is the fault still present?

    1. If YES, continue with next step.
    2. If NO, do the close out.

  2. Using the PMAT, access the Active Faults/Stored Faults as per AMM Tasks.
  3. Select related CAIMS message below:
    NOTE:
    If reporting LRU for this CAS message displayed in RED on the PMAT, select "No available CAIMS message" in the dropdown list.
    If no associated ACTIVE FAULT is displayed on the PMAT, select "No available CAIMS message" in the dropdown list.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.