background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

08/10/21

Message Overview:

ASCB FAULT
(Advisory)

DDG Reference: None
Pilot Action (QRH): ADVISORY 11-4
System Description: 31-44-00
Schematic Diagram: 31-44-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 31-44-01 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Message Description:

The member system data that is usually transmitted on the primary and secondary ASCB is incorrect, is available on only one bus or is not available at all. The message is available only during a WOW condition.

Possible Causes:

  • Primary and/or Secondary Bus in ASCB
  • ASCB Isolation Couplers and/or Resistor
  • Bus Controller in the IAC System

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

For in depth ASCB BUS troubleshooting recommendations and test equipment detail, refer to the ASCB Fault Isolation Guide.

Quick Links:

Removal of the Isolation Couplers AMM 31-44-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Isolation Couplers AMM 31-44-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Operational Test of the Digital Bus System AMM 31-44-00-710-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Integrated Maintenance Test (IMT) Fault Code Look-up AMM 45-45-00-970-826 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wire Repair SPM 20-12-10 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Select related CAIMS message below:

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.