background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

07/29/19

Message Overview:

REVRSION CTLR FAIL
(Advisory)

DDG Reference: None
Pilot Action (QRH): ADVISORY 11-8
System Description: 31-61-00
Schematic Diagram: 31-61-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 31-61-01 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

IAC symbol generator transmits incorrect or no data to the EFDUs (through the reversion control panel).

Possible Causes:

  • Interface to the Reversion Control Panel
  • Reversion Control Panel

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of Reversion Control Panel AMM 31-61-17-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of Reversion Control Panel AMM 31-61-17-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Electronic Flight Display Units AMM 31-61-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Electronic Flight Display Units AMM 31-61-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Integrated Avionics Computers (IAC) AMM 31-41-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Integrated Avionics Computers (IAC) AMM 31-41-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wire Repair SPM 20-12-10 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Perform wiring checks between Reversion Control Panel, DUs and IACs. Repair as required.

    1. If system checks are good, do close out.
    2. If fault remains, continue with next step.

  2. Replace Reversion Control Panel.

    1. If system checks are good, do close out.
    2. If fault remains, continue with next step.

  3. Replace defective DUs.

    1. If system checks are good, do close out.
    2. If fault remains, continue with next step.

  4. Replace defective IACs.
  5. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.