background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

06/11/19

Message Overview:

Fault Message:

ACSC2 [CH A NO DATA] /ACSC1 /WRG

Fault Code:

2163327ECS

Associated CAS:

R PACK AUTO FAIL
(Caution)

R PACK FAULT
(Advisory)

Reporting LRU: Air Conditioning System Controller (ACSC) 2
System Description: 21-60-00
Schematic Diagram: 21-60-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 36-11-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

Air Conditioning System Controller (ACSC) 2 Receiver Channel A does not receive data from ACSC 1.

Possible Causes:

  • Air Conditioning System Controller (ACSC) 1 (A87)
  • Air Conditioning System Controller (ACSC) 2 (A88)
  • Junction Box (JB3)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin:

  • AW700-21-0160 - "PACK FAULT" CAS message while CAIMS / OMS is active (Global Express / XRS - 9002 to 9312, 9314 to 9380, 9384 to 9429 and Global 5000 - 9127 to 9383, 9389 to 9400, 9404 to 9431 and 9998)

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Air-Conditioning System Controllers AMM 21-60-21-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Air-Conditioning System Controllers AMM 21-60-21-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Junction Box JB3 AMM 24-00-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Junction Box JB3 AMM 24-00-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wire Repair - Maintenance Practices - ALL SPM 20-12-10 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Swap ACSC 2 with ACSC 1.

    1. If the system checks are good, replace ACSC 2 and do close out.
    2. If the fault remains, continue with next step.

  2. Perform a wiring checks between ACSC 2 and JB3 (ref: Wiring Manual : 36-11-00 Sheet 1 of 12 Page 2).

    1. If wiring checks are not good, repair defective associated wiring and do close out.
    2. If wiring checks are good, continue with next step.

  3. Perform continuity check of JB3 (ref Wiring Manual : 36-11-00 Sheet 1 of 12 Page 2).

    1. If there is continuity, repair the defective associated wiring as required and do close out.
    2. If there is no continuity, continue with next step.

  4. Replace JB3.
  5. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.