04/04/25
Message Overview:
Message Name:
SPDA 1 FAILED (LEVEL C) R MICROPROC
Message Code:
2462606SPD
Associated CAS:
| Reporting LRU: | Secondary Power Distribution Assembly (SPDA) 1 |
| System Description: | 24-60-00 - Electrical Load Distribution |
| Schematic Diagram: | [ Global Express ] [ G5000 ] [ Global XRS ] SSM 24-62-01-101 - Secondary Power Distribution Assemblies (SPDA) System |
| Wiring Diagram: | [ Global Express ] [ G5000 ] [ Global XRS ] 24-62-01 - SPDA No. 1 - ALL [ Global Express ] [ G5000 ] [ Global XRS ] 24-62-01 - SPDA No. 1 - 9127-9148 [ Global Express ] [ G5000 ] [ Global XRS ] 24-62-01 - SPDA No. 1 - 9149-9158 [ Global Express ] [ G5000 ] [ Global XRS ] 24-62-01 - SPDA No. 1 - 9159-9998 |
Message Description:
The Secondary Power Distribution Assembly (SPDA) 1 detects a failure with the Right Microprocessor.
Possible Causes:
- Secondary Power Distribution Assembly (SPDA) 1 (A13)
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Full Throttle Blog/Forum Articles/Infoservice/Newsletter: None
Flight Operation Notifications Manual (FONM): None
Quick Links:
| Standard Aircraft Configuration for Maintenance | [ G5000 ] [ Global Express ] [ Global XRS ] AMM12-00-00-867-801 |
| Aircraft Walkaround (for Maintenance) | [ G5000 ] [ Global Express ] [ Global XRS ] AMM12-00-00-867-802 |
| Connect Electrical Power to the Aircraft | [ G5000 ] [ Global Express ] [ Global XRS ] AMM24-00-00-861-801 |
| Removal of the Secondary-Power Distribution Assemblies | [ G5000 ] [ Global Express ] [ Global XRS ] AMM24-62-01-000-801 |
| Installation of the Secondary-Power Distribution Assemblies | [ G5000 ] [ Global Express ] [ Global XRS ] AMM24-62-01-400-801 |
Troubleshooting Recommendations:
- Interchange SPDA 1 with SPDA 2. Is the fault still present?
- If YES, continue with next step.
- If NO, do close out.
NOTE: Swapping the SPDA to a different position will force it to reconfigure itself to that new position. This may help to clear the fault.
- Return the SPDA to its original position. Is the fault still present?
- If YES, go to next step.
- If NO, do close out.
- Replace SPDA 1.
- Do close out.