06/19/19
Message Overview:
Fault Message:
ELT TRANSMITTING
Fault Code:
000000ELT
Associated CAS:
| Reporting LRU: | Emergency Locator Transmitter (ELT) |
| System Description: | 25-61-00 |
| Schematic Diagram: | 25-61-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 25-61-01 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
ELT TRANSMITTING (Amber) shows when Emergency Locator Transmitter (ELT) is transmitting and cockpit ELT switch is set to ON. This troubleshooting applies under abnormal condition.
Possible Causes:
- Emergency Locator Transmitter (ELT) (A220)
- Emergency Locator Transmitter (ELT) Remote Control Switch
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Removal of the Emergency Locator Transmitter (ELT) | AMM 25-61-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Emergency Locator Transmitter (ELT) | AMM 25-61-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Emergency Locator Remote-Control | AMM 25-61-09-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Emergency Locator Remote-Control | AMM 25-61-09-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Data Acquisition Units (DAU) | AMM 31-42-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Data Acquisition Units (DAU) | AMM 31-42-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Swap DAUs.
- If system checks are good, replace the defective DAU and do close out.
- If fault remains, continue with next step.
- Perform a wiring check between DAU 1, Remote Switch/Emergency Locator Remote Control and ELT.
- If system checks are good, repair the defective wiring and do close out.
- If fault remains, continue with next step.
- Replace Emergency Locator Remote Control.
- If system checks are good, do close out.
- If fault remains, continue with next step.
- Replace ELT.
- Do close out.