background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

06/22/19

Message Overview:

Fault Message:

ADC#1/ADC#2/ADC#3/MACH XDUCER/SPC B

Fault Code:

2731202STL

Associated CAS:

STALL PROTECT FAIL
(Caution)

Reporting LRU: Stall Protection Computer (SPC)
System Description: 27-32-00
Schematic Diagram: 27-32-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 27-32-05 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

When one or more of the following occurs:

  • Data read by the Stall Protection Computer Channel B is not the same as data sent from the Air Data Computers
    • OR,
  • The data read from the Air Data Computers and the Mach Transducer do not agree with Stall Protection Computer Channel B

Possible Causes:

  • Air Data Computer (ADC) 1 (A27)
  • Air Data Computer (ADC) 2 (A28)
  • Air Data Computer (ADC) 3 (A29)
  • Mach Transducer (MT80)
  • Stall Protection Computer (SPC) (A40)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin:

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Stall Protection Computer AMM 27-32-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Stall Protection Computer AMM 27-32-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Mach Transducer AMM 27-32-13-000-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Mach Transducer AMM 27-32-13-400-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Micro Air-Data Computers AMM 34-11-09-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Micro Air-Data Computers AMM 34-11-09-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. If there are any ADC related CAS messages posted, troubleshoot them first.
  2. Replace Mach Transducer.

    1. If system checks are good, do close out.
    2. If fault remains, continue with next step.

  3. Perform wiring checks between Mach Transducer, MADCs and SPC.

    1. If wiring checks are not good, repair defective wiring as required and do close out.
    2. If wiring checks are good, continue with next step.

  4. Replace Stall Protection Computer (SPC).
  5. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.