12/11/19
Message Overview:
Fault Message:
FCU #2 POST NOT RUN [LGECU INVLD]
Fault Code:
27653262SX
Associated CAS:
| Reporting LRU: | Landing Gear Electronic Control Unit (LG ECU) Flight Control Unit (FCU) 2 |
| System Description: | 27-60-00 |
| Schematic Diagram: | 27-60-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 27-60-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
Landing Gear Electronic Control Unit (LG ECU) and the Flight Control Unit (FCU) could not perform the System Power-On Self Test (SPOST).
Possible Causes:
- Landing Gear Electronic Control Unit (LG ECU) (A52)
- Flight Control Unit (FCU) 2 (A66)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Removal of the Flight-Control Units | AMM 27-61-05-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Flight-Control Units | AMM 27-61-05-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Landing-Gear Electronic Control-Unit (LG ECU) | AMM 32-31-09-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Landing-Gear Electronic Control-Unit (LG ECU) | AMM 32-31-09-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Access to System Diagnostics | AMM 45-45-00-970-804 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Re-rack FCUs.
- If system checks are good, do close out.
- If fault remains, continue with next step.
- Swap FCU 2 with FCU 1.
- If system checks are good, replace FCU 2 and reset FCUs latched faults and do close out.
- If fault remains, continue with next step.
- Perform wiring checks between FCU 2 (A66AP1) and LGECU (A52BP1).
- If wiring checks are not good, repair defective wiring as required and do close out.
- If wiring checks are good, continue with next step.
- Replace LGECU.
- Do close out.