background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE
(CAUTION)
AMBER MESSAGE
(ADVISORY)
CYAN MESSAGE
(STATUS)
WHITE MESSAGE
Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

07/25/19

Message Overview:

Fault Message:

WX/WRG/DAU #1 INACTIVE

Fault Code:

3141113DAU

Associated CAS:

None

Reporting LRU: Data Acquisition Unit (DAU) 1
System Description: 31-40-00
Schematic Diagram: 31-42-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 31-42-01 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

The Data Acquisition System does not receive ARINC 429 data from the Weather Radar (WXR) Receiver/Transmitter.

Possible Causes:

  • Weather Radar (WXR) Receiver/Transmitter (A125)
  • Junction Box (JB) 3/PCB 2
  • Data Acquisition Unit (DAU) 1 (A17)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Opening of Non-Thermal Circuit Breakers AMM 24-00-00-863-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Closing of Non-Thermal Circuit Breakers AMM 24-00-00-863-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Electrical/Electronic Safety Precautions AMM 24-00-00-910-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Electrostatic Discharge Safety Precautions AMM 24-00-00-910-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Operational Test of the Junction Box JB3 Circuit-Card 2 AMM 24-00-02-710-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Data Acquisition Units (DAU) AMM 31-42-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Data Acquisition Units (DAU) AMM 31-42-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Operational Test of the Weather Radar System AMM 34-41-00-710-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Weather Radar Receiver/Transmitter AMM 34-41-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Weather Radar Receiver/Transmitter AMM 34-41-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Access to Active Faults AMM 45-45-00-970-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the External Avionics-Compartment Access-Panel (140BB) AMM 52-45-11-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the External Avionics-Compartment Access-Panel (140BB) AMM 52-45-11-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Nose Radome AMM 53-60-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Nose Radome AMM 53-60-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Safety Precautions - Maintenance Practices - ALL SPM 20-00-01-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Remove DAU 1 and disconnect WX Radar connector A125P1. Perform a continuity check as follows:

    From To Result
    A17CP1-K1 A125P1-49
    A17CP1-K2 A125P1-50
    A17CP1-Shield A125P1-Shield

    1. If wiring checks are not good, repair defective wiring as required and do close out.
    2. If wiring checks are good, continue with next step.

  2. Perform a continuity check as follows:

    From To Result
    A17CP1-K1 Ground
    A17CP1-K2 Ground
    A17CP1-Shield Ground

    1. If there is no continuity, repair defective wiring as required and do close out.
    2. If there is continuity, continue with next step.

  3. Swap DAU 1 with DAU 3. Is the fault still present?

    1. If NO, replace DAU 1 and do close out.
    2. If YES, continue with the next step.

  4. Replace the Weather Radar (WXR) Receiver/Transmitter.
  5. Do close out.
Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.