08/06/19
Message Overview:
Fault Message:
R MAIN-GEAR ALMOST-DOWN SENSOR/WRG
Fault Code:
3230122EL
Associated CAS:
| Reporting LRU: | Landing Gear Electronic Control Unit (LGECU) |
| System Description: | 32-61-00 |
| Schematic Diagram: | 32-61-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 32-61-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
There is a problem with the Right Main Gear Almost Down Sensor and related wiring.
Possible Causes:
- Right Main Gear Almost Down Sensor (MT35)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
NOTE: There are CAIMS messages associated with this task as follows:
Quick Links:
| Opening of Non-Thermal Circuit Breakers | AMM 24-00-00-863-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Closing of Non-Thermal Circuit Breakers | AMM 24-00-00-863-802 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Electrical/Electronic Safety Precautions | AMM 24-00-00-910-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Landing Gear Safety Precautions | AMM 32-00-00-910-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Operational Test of the Position Indication System | AMM 32-61-00-710-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Main-Gear Almost-Down Proximity-Sensors | AMM 32-61-01-000-805 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Main-Gear Almost-Down Proximity-Sensors | AMM 32-61-01-400-805 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Adjustment of the Main-Gear Almost-Down Proximity-Sensors | AMM 32-61-01-820-805 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Safety Precautions - Maintenance Practices - ALL | SPM 20-00-01-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Access the Main Landing Gear (MLG) door assembly. Check if there is damage to the MLG almost down proximity sensor and wiring.
- If there is damage to the sensor or wiring, go to step 7.
- If there is no damage, continue with the next step.
- Check if there is damage in the RH main-gear almost-down sensor target.
- If there is damage, replace the RH MLG almost-down sensor target and do close out.
- If there is no damage, continue with the next step.
- Perform the Adjustment of the Main-Gear Almost-Down Proximity-Sensors (AMM 32-61-01-820-805). Is the fault still present?
- If NO, do close out.
- If YES, continue with next step.
- Access and disconnect the R MLG pressure bulkhead connector (P430). Perform a continuity check as follows:
From To Result P430-q P430-r - If there is no continuity, go to step 7.
- If there is continuity, continue with next step.
- Perform a continuity check as follow:
From To Result A52AP1-J8 J430-q A52AP1-K8 J430-r - If there is no continuity, repair defective wiring as required and do close out.
- If there is continuity, continue with the next step.
- Perform a continuity check as follow:
From To Result A52AP1-J8 Ground A52AP1-K8 Ground - If there is continuity, repair defective wiring as required and do close out.
- If there is no continuity, continue with next step.
- Replace Right Gear Almost Down Sensor.
- Do close out.