08/07/19
Message Overview:
Fault Message:
L MAIN-GEAR DOOR-OPEN SENSOR/WRG
Fault Code:
3230131EL
Associated CAS:
| Reporting LRU: | Landing Gear Electronic Control Unit (LGECU) |
| System Description: | 32-61-00 |
| Schematic Diagram: | 32-61-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 32-61-01 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
Left Main Gear Door Open Sensor has been detected failed by the Landing Gear Electronic Control Unit (LGECU).
Possible Causes:
- Left Main Gear Door Open Sensor (MT27)
- Landing Gear Electronic Control Unit (LGECU) (A52)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Removal of the Landing-Gear Electronic Control-Unit (LG ECU) | AMM 32-31-09-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Landing-Gear Electronic Control-Unit (LG ECU) | AMM 32-31-09-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Operational Test of the Position Indication System | AMM 32-61-00-710-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Main-Gear Door-Open Proximity-Sensors | AMM 32-61-01-000-802 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Main-Gear Door-Open Proximity-Sensors | AMM 32-61-01-400-802 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Adjustment of the Main-Gear Door-Open Proximity-Sensors | AMM 32-61-01-820-802 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Re-seat LGECU.
- If system checks are good, do close out.
- If fault remains, continue with next step.
- Perform wiring checks between LGECU and Left Main Gear Door Open sensor (MT27).
- If wiring checks are not good, repair defective wiring as required and do close out.
- If wiring checks are good, continue with next step.
- Replace Left Main Gear Door Open proximity sensor.
- If system checks are good, do close out.
- If fault remains, continue with next step.
- Replace LGECU.
- Do close out.