background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

08/07/19

Message Overview:

Fault Message:

R MLG DOOR-OPEN SENSOR DISAGREE

Fault Code:

3230146EL

Associated CAS:

None

Reporting LRU: Landing Gear Electronic Control Unit (LGECU)
System Description: 32-61-00
Schematic Diagram: 32-61-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 32-61-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

There is a disagree with the Right Main-Gear Door-Open Sensor.

Possible Causes:

  • Right Main-Gear Door Open Proximity Sensor (MT36)
  • Main Landing Gear (MLG) Inboard Door

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Opening of Non-Thermal Circuit Breakers AMM 24-00-00-863-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Closing of Non-Thermal Circuit Breakers AMM 24-00-00-863-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Electrical/Electronic Safety Precautions AMM 24-00-00-910-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Landing Gear Safety Precautions AMM 32-00-00-910-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Rigging of the Main-Gear Inboard Doors AMM 32-12-05-820-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Main-Gear Door-Open Proximity-Sensors AMM 32-61-01-000-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Main-Gear Door-Open Proximity-Sensors AMM 32-61-01-400-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Adjustment of the Main-Gear Door-Open Proximity-Sensors AMM 32-61-01-820-802 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Access the RH Main Landing Gear (MLG) door assembly. Check if there is damage to the RH MLG door-open proximity sensor and bracket.

    1. If there is damage to the sensor, replace the RH main-gear door-open sensor.
    2. If there is damage to the sensor bracket, replace the sensor bracket and do close out.
    3. If there is no damage, continue with next step.

  2. Check if there is damage in the RH main-gear door-open sensor target.

    1. If there is damage to the sensor target, replace the sensor target and do close out.
    2. If there is no damage, continue with the next step.

  3. Perform the rigging of the main-gear inboard doors.
  4. Perform the adjustment of the main-gear door-open proximity-sensors.
  5. Perform the operational test of the position indication system.

    1. If the operational test is satisfactory, do close out.
    2. If the operational test is not satisfactory, continue with next step.

  6. Perform the troubleshooting for the RH sensor and target again. Repair as required
  7. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.