03/19/21
Message Overview:
Message Name:
SPC/WRG/LGECU B (MLG WOW IND)1
Message Code:
3231208EL
Associated CAS:
| Reporting LRU: | Landing Gear Electronic Control Unit (LG ECU) |
| System Description: | 32-31-00 |
| Schematic Diagram: | 32-31-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 32-31-05 [ Global Express ] [ G5000 ] [ Global XRS ] |
Message Description:
The Landing Gear Electronic Control Unit (LGECU) has detected a failure in the Stall Protection Computer (SPC) wiring.
Possible Causes:
- Landing Gear Electronic Control Unit (LG ECU) (A52)
- Electrical Management System Control and Display Unit (EMS CDU) 1 (A94)
- Stall Protection Computer (SPC) (A40)
Troubleshooting Tips:
Advisory Wire/Service Bulletin:
- AW700-45-0065 - CAIMS Nuisance Fault Messages
Forum Articles/Infoservice/Newsletter: None
Notice To Operators (NTO): None
Flight Operation Notifications Manual (FONM): None
Quick Links:
| Removal of the Stall Protection Computer | AMM 27-32-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Stall Protection Computer | AMM 27-32-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Landing-Gear Electronic Control-Unit (LG ECU) | AMM 32-31-09-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Landing-Gear Electronic Control-Unit (LG ECU) | AMM 32-31-09-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Re-rack the Landing Gear Electronic Control Unit (LGECU). Is the fault still present?
- If YES, continue with next step.
- If NO, do close out.
- Re-rack the Stall Protection Computer (SPC). Is the fault still present?
- If YES, continue with next step.
- If NO, do close out.
- Perform a wiring check of the MAIN GEAR WOW B wire between the LGECU connector A52BP1 and the SPC connector A40AP1 and A40BP1.
- If wiring defects are found, repair defective wiring as required and do close out.
- If no defects are found, continue with next step.
- Replace the LGECU. Is the fault still present?
- If YES, continue with next step.
- If NO, do close out.
- Replace the SPC.
- Do close out.