background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

08/24/19

Message Overview:

Fault Message:

EVS COMMUNICATION/WRG

Fault Code:

3430004EVS

Associated CAS:

None

Reporting LRU: Head-Up-Display (HUD) System
System Description: 34-33-00
Schematic Diagram: 34-33-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 34-33-01 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

Head-Up-Display System (HUDS) is not able to communicate with the Infrared Sensor Unit (ISU) or the HUD is invalid.

Possible Causes:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Head-Up-Display (HUD) Computer AMM 34-32-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Head-Up-Display (HUD) Computer AMM 34-32-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Enhanced Vision System (EVS) - InfraRed
Sensor Unit (ISU)		 AMM 34-33-03-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Enhanced Vision System (EVS) - InfraRed
Sensor Unit (ISU)		 AMM 34-33-03-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Perform wiring checks between HUDC and ISU as follow:

    From To Result
    A250BP1-J3 A318P1-a
    A250BP1-K3 A318P1-u
    A250DP1-G1 A318P1-H
    A250DP1-H1 A318P1-Z

    1. If wiring checks are not good, repair defective wiring as required and do close out.
    2. If wiring checks are good, continue with next step.

  2. Replace HUDC.

    1. If system checks are good, do close out.
    2. If fault remains, continue with next step.

  3. Replace ISU.
  4. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.