background
x
loader
Troubleshooting
arrow By ATA By Message Color By Observed Faults By CAIMS By Tips

Select color for CAS message that you wish to troubleshoot

(WARNING)
RED MESSAGE (CAUTION)
AMBER MESSAGE (ADVISORY)
CYAN MESSAGE (STATUS)
WHITE MESSAGE Require immediate crew attention. These messages are accompanied by flashing master warning, triple chime attenson with or without voice message or dedicated tone. Require immediate crew awareness and future crew action may be required in the form of alternate system selection or performance limitation. These message are accompanied by flashing master caution and a single chime. Indicate safe or normal system operation which require crew awareness, over and above the dark cockpit philosophy. Indicate minor failures or reduction in systems capability, which require no crew action.

This page includes :

For AOG assistance contact:

CRC Montreal (YUL)
Quick Links

08/24/19

Message Overview:

Fault Message:

IRU1/WRG/HUDC COM FAULT

Fault Code:

3430008HUD

Associated CAS:

None

Reporting LRU: Head-Up-Display (HUD) System
System Description: 34-32-00
Schematic Diagram: 34-32-00 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wiring Diagram: 34-32-03 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Fault Description:

Head-Up-Display (HUD) System does not receive data from the Inertial Reference Unit (IRU).

Possible Causes:

  • Head-Up Flight Display Computer (HFDC) (A250)
  • Inertial Reference Unit (IRU) 1 (A32)
  • Associated Wiring

Troubleshooting Tips:

Advisory Wire/Service Bulletin: None

Forum Articles/Infoservice/Newsletter: None

Quick Links:

Removal of the Head-Up-Display (HUD) Computer AMM 34-32-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Head-Up-Display (HUD) Computer AMM 34-32-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Removal of the Inertial Reference Units (IRU) AMM 34-45-01-000-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Installation of the Inertial Reference Units (IRU) AMM 34-45-01-400-801 [ Global Express ]  [ G5000 ]  [ Global XRS ]
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02 [ Global Express ]  [ G5000 ]  [ Global XRS ]

Troubleshooting Recommendations:

  1. Swap IRU 1 with IRU 2.

    1. If system checks are good, replace IRU 1 and do close out.
    2. If fault remains, continue with next step.

  2. Perform wiring checks between IRU 1, JB5 and HUDC as follow:
    NOTE: when short circuit is detected, remove all interface components and reinstall one at a time to isolate short (interface component includes DAU 1).

    From To Result
    A32BP1-E5 A250BP1-F1
    A32BP1-E6 A250BP1-G1
    GND A250BP1-D2
    A32BP1-SH A250BP1-SH

    1. If wiring checks are not good, repair defective wiring as required and do close out.
    2. If wiring checks are good, continue with next step.

  3. Replace HUDC.
  4. Do close out.

Registered and/or unregistered trademarks of Bombardier Inc. or its subsidiaries. © 2015 Bombardier Inc. All rights reserved.