08/28/19
Message Overview:
Fault Message:
DAU4A/WRG/HUDC MON FAULT
Fault Code:
3430019HUD
Associated CAS:
| Reporting LRU: | Head-Up Display (HUD) Computer |
| System Description: | 34-32-00 |
| Schematic Diagram: | 34-32-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 31-42-08 [ Global Express ] [ G5000 ] [ Global XRS ] 34-32-04 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
Head-Up Display System (HUD) does not receive data from the Data Acquisition Unit 4 (DAU 4).
Possible Causes:
- Head-Up-Display (HUD) Computer (A250)
- Data Acquisition Unit (DAU) 4 (A31)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
If the message DAU 4A FAIL (Cyan) shows on the EICAS, do the fault isolation for the DAU 4.
Quick Links:
| Removal of the Data Acquisition Units (DAU) | AMM 31-42-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Data Acquisition Units (DAU) | AMM 31-42-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Head-Up-Display (HUD) Computer | AMM 34-32-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Head-Up-Display (HUD) Computer | AMM 34-32-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Swap DAU 4 with DAU 2.
- If system checks are good, replace DAU 4 and do close out.
- If fault remains, continue with next step.
- Perform wiring checks between DAU 4A, JB4 and HUDC.
- If wiring checks are not good, repair defective wiring as required and do close out.
- If wiring checks are good, continue with next step.
NOTE: When short circuit is detected, remove all interface components and reinstall one at a time to isolate short (interface components include CPC2, ACSC2, SFCU2, BMC 2, LGECU and SPC).
- Replace HUDC.
- Do close out.