09/24/19
Message Overview:
Fault Message:
L FMU[FMV LVDT]/EEC XCK
Fault Code:
7325526LBR
Associated CAS:
| Reporting LRU: | Left Engine Electronic Controller (EEC) |
| System Description: | 73-20-00 |
| Schematic Diagram: | None |
| Wiring Diagram: | 71-50-01 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
There is an unsatisfactory difference between the signals from both channels of the Fuel Metering Valve. These signals are sent by a Linear Variable Differential Transformer (LVDT). During engine operation the signals are compared continuously by the Full-Authority Digital Engine-Controller (FADEC).
Possible Causes:
- Fuel Metering Unit (FMU)
- Left Engine Electronic Controller (EEC)
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Engine Safety Precautions | AMM 71-00-00-910-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wet Motor the Engine | AMM 71-00-00-866-805 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Opening of the Cowls | AMM 71-10-00-010-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Closing of the Cowls | AMM 71-10-00-410-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Deactivation of the Thrust Reverser (for Maintenance) | AMM 78-30-00-040-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Activation of the Thrust Reverser (for Maintenance) | AMM 78-30-00-440-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Engine Electronic Controller (EEC) | EMM 73-21-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Engine Electronic Controller (EEC) | EMM 73-21-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Fuel Metering Unit (FMU) | EMM 73-21-03-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Fuel Metering Unit (FMU) | EMM 73-21-03-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Perform a deactivation of the thrust reverser.
- Open the cowls.
- If the fault message is not active, go to step 6.
- If the fault message is active, continue with next step.
- Replace the FMU.
- If system checks are good, go to step 6.
- If fault remains, continue with next step.
- Wet motor the engine.
- If the fault message is not active, go to step 6.
- If the fault message is active, continue with next step.
- Replace the EEC 1.
- Close the cowls and perform a activation of the thrust reverser.
- Do close out.