10/04/19
Message Overview:
Fault Message:
R ARINC CH A [INPUT] ADCS MA
Fault Code:
7327619RBR
Associated CAS:
| Reporting LRU: | Right Engine Electronic Controller (EEC) |
| System Description: | 73-20-00 |
| Schematic Diagram: | 76-10-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 34-11-04 [ Global Express ] [ G5000 ] [ Global XRS ] 71-50-01 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
Engine Electronic Controller (EEC) 2 CH A has detected a data input failure from Micro Air-Data Computer (MADC) 3.
Possible Causes:
- Micro Air-Data Computer (MADC) 3 (A29)
- Right Engine Electronic Controller (EEC)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin:
- AW700-45-0065 - CAIMS Nuisance Fault Messages
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Removal of the Micro Air-Data Computers | AMM 34-11-09-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Micro Air-Data Computers | AMM 34-11-09-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Eng Electronic Controller (EEC) | EMM 73-21-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Eng Electronic Controller (EEC) | EMM 73-21-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Check if the CAS message ADC 3 FAIL is posted.
- If the CAS message exists, troubleshoot it first and continue with next step.
- If the CAS message does not exists, continue with next step.
- Perform wiring checks between MADC 3 and EEC 2 CH A.
- If wiring checks are not good, repair defective wiring as required and do close out.
- If wiring checks are good, continue with next step.
- Swap MADC 3 with MADC 1.
- If system checks are good, replace MADC 3 and do close out.
- If fault remains, continue with next step.
- Replace Right EEC.
- Do close out.