10/10/19
Message Overview:
Fault Message:
L OIL TEMP WRG/PROBE/EEC XCK MA
Fault Code:
7327126LBR
Associated CAS:
| Reporting LRU: | Left Engine Electronic Controller (EEC) |
| System Description: | 79-30-00 |
| Schematic Diagram: | 79-30-00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wiring Diagram: | 71-50-01 [ Global Express ] [ G5000 ] [ Global XRS ] |
Fault Description:
The fault message is set when there is an unsatisfactory difference between the signals from the two Oil Temperature Transducers. These are the Oil Temperature Transducer for Engine Electronic Controller (EEC) channel A and the Oil Temperature Transducer for EEC channel B. The Full-Authority Digital Engine-Controller (FADEC) continuously monitors the circuits of the two Oil Temperature Transducers.
Possible Causes:
- Left Oil Temperature Transducer
- Left Engine Electronic Controller (EEC)
- Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin: None
Forum Articles/Infoservice/Newsletter: None
Quick Links:
| Opening of the Cowls | AMM 71-10-00-010-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Closing of the Cowls | AMM 71-10-00-410-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Connection of Electrical Connectors | EMM 70-50-01-910-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Eng Electronic Controller (EEC) Mod 73-101559 |
EMM 73-21-01-000-801-B00 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Eng Electronic Controller (EEC) Mod 73-101559 |
EMM 73-21-01-400-801-B001 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Removal of the Oil Temperature Transducer | EMM 79-32-01-000-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Installation of the Oil Temperature Transducer | EMM 79-32-01-400-801 [ Global Express ] [ G5000 ] [ Global XRS ] |
| Wire Repair - Maintenance Practices - ALL | SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ] |
Troubleshooting Recommendations:
- Swap Left and Right oil temperature transducer.
- If system checks are good, replace Left oil temperature transducer and do close out.
- If fault remains, continue with next step.
- Perform wiring checks between the Left EEC and the Oil temperature transducer.
- If wiring checks are not good, repair defective wiring as required and do close out.
- If wiring checks are good, continue with next step.
- Replace Left EEC.
- Do close out.
